Lansky QuadSharp (QSHARP) อุปกรณ์ลับมีดพกพา

องศาของมีดแต่ละเล่มไม่เท่ากัน คุณจึงต้องการอุปกรณ์ลับมีดขนาดเล็กล่าสุดตัวนี้จาก Lansky หนึ่งเดียวที่ตั้งองศาของมีดมาถึง 4 ระดับ 17º, 20º, 25º, และ 30º รองรับมีดเกือบทุกขนาด แข็งแกร่งด้วยโครงสร้างโลหะ เพียงรูดแค่ 3-4 ครั้งมีดของคุณก็คมขึ้นทันที

QuadSharp Pocket Sharpener

Maintain your knives in the field to the exact angle you set with your Lansky Sharpening Kit! Featuring the same four angles as the legendary Lansky Controlled-Angle Sharpening System, the QuadSharp™ is the perfect portable knife sharpener and kit accessory. The built-in ceramic polishing benchstone allows this pocket sharpener to be used as a fully functional, stand alone sharpening solution. The smallest, most versatile multi-angle knife sharpener available!

Features:

• Four Sharpening Angles: 17º, 20º, 25º, and 30º
• Carbide slots sharpen in 3-4 strokes
• Ceramic benchstone for fine polishing
• Rugged metal construction
• 100% compatible with all Lansky Kits and accessories

INSTRUCTIONS
Maintain your knives in the field to the exact angle you set with your legendary Lansky Controlled-Angle System, or use as a fully functional, stand-alone sharpening solution. The carbide V-groove sharpens in 3 to 4 strokes. Next, freehand polish your newly sharpened edge on the built-in ceramic benchstone. Additionally, the ceramic benchstone is tapered for effectively sharpening serrations. See below for details.

1.  Carbides: 17º, 20º, 25º and 30º

Used to set an edge for an extremely dull blade or to sharpen the blade in seconds when the need arises. (For more information on individual angles see Which Angle Should I Use When Sharpening My Knife?)

Holding the knife with your dominant hand, and using the other hand to hold the sharpener: pull the knife through the desired angle slot. Just three or four strokes using moderate pressure will restore your blade. Rinse blade thoroughly after sharpening.

Note: Carbide is extremely aggressive and should only be used for super quick sharpening as the need arises. For general edge maintenance: use the built-in ceramic benchstone element.

2.  Ceramic Benchstone

The medium (800) grit ceramic element should be used in a benchstone type fashion, or like a butcher steel. The Ceramic Benchstone is harder than steel, will never wear out, and can be used often as the primary sharpening element of your QuadSharp™. The Ceramic Benchstone is also tapered for sharpening serrated knives.

(PRO-TIP: Extremely dull blades should be re-profiled in one of the carbide slots before using the ceramic benchstone).

Eventually metal shavings will accumulate as dark streaks on the ceramic and will slow effectiveness. Clean with a Lansky EraserBlock.

3. Sharpening Serrations 

Sharpen one serration at a time by pulling the ceramic element against the grooved side of the serration.  For larger serrations: use a rolling motion to sweep the corner of the sharpener from one side of the serration to the other. Repeat until serration is sharp then move to the next serration.